SKU: HEBW1021 Biltwell Gringo Helmet Gloss Vintage White

Biltwell Gringo Helmet - Gloss Vintage White
ECE R22.05

The all-time classic retro helmet. Gringo takes its '60s motorsport aesthetic and elevates it to modern ECE R22.05 motorcycle standards. Ride with goggles or snap on an optional Gringo Blast or Universal Bubble Shield.

• Injection-molded ABS outer shell is rugged yet lightweight
• Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
• Molded urethane chin bar pad dissipates energy during frontal impacts
• Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
• Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
• Molded recesses inside EPS designed to accept various aftermarket audio and communication components

For sizing information, see the Sizing Tab

Gringo ECE Helmet

Size  |  Centimeter  |  Inches

XS   |  53 - 54.25  |  20 7/8 - 21 3/8  
Small  |  54.5 - 55.75  |  21 1/2 - 22  
Medium  |  56 - 57.25  |  22 1/8 - 22 5/8  
Large    |  57.5 - 58.75  |  22 3/4 - 23 1/4  
XL      |  59 - 60.25  |  23 3/8 - 23 7/8  
2XL    |  60.5 - 61.75  |  24 - 24 1/2  

Cheek Pads can be exchanged for fit fine tuning.
Gringo cheek pads are available in 5mm, 10mm, 15mm, 19mm, 29mm 33mm and 38mm

Proper Fit

Never buy a used helmet or borrow someone else’s helmet. Over time the protective foam in helmets will adjust to the contours of a user’s head. Or it could already have been in a crash
A used or borrowed helmet may not offer as much protection as a new helmet.

Wearing the wrong size helmet can increase your risk of serious injury or death in an accident. A helmet that is too large for your head may be dislodged or knocked off in an accident. To select the right size helmet for your head, follow these instructions:

Measure your head. Wrap a tape measure around your head above your eyebrows.

Use the sizing chart above to select the helmet size that corresponds most closely to your head measurement. If your head size falls between two helmet sizes, try on the larger helmet first and then the smaller size.

Try on the helmet by grasping both chin straps to pull the helmet completely onto your head, ensuring that the top of your head is in contact with the top of the helmet interior.

Check for a proper fit. To make sure your helmet is the right size, check that:

• The helmet inner lining fits snugly around your head.
• The top pad presses firmly on your head.
• The cheek pads contact your cheeks.
• There is no space around your brow under the inner lining.