SKU: AMRM9309 RAM Mounts Combination Handlebar/Brake/Clutch Base - .5"-1.25"

RAM Mounts Combo Handlebar/Brake/Clutch Base - .5"-1.25"
# RAM-B-309-7U

Combination accessory base with 1" B size ball connects to your handlebar clutch/brake clamp, left or right side, or mounts on any handlebar or rail .5"-1.25" in diameter.

• Base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, or bars from .5"-1.25" with U bolts provided in the kit.
• This RAM mounting base will fit Goldwing, Harley Davidson and pretty much all other motorcycles. The perch mount holes centers have a minimum width of 0.94" (24mm) and a maximum of 1.58" (40mm). If you are not sure if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
• Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Hardware Included:

• (2) M6 x 55mm Hex Bolts
• (2) #1/4-20 x 2" Hex Bolts
• (2) 1/4"-20 x 2.5" Hex Bolts
• (2) 1/2" Spacers
• (2) 1/4" Split Lock Washers
• (1) 1/4"-20 U-Bolt for .5" - 1" Rails
• (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
• (2) 1/4"-20 Nylock Nuts
• (2) Rubber Caps
• (1) U-Bolt Spacer