SKU: EHHT930CR2 Heat-Troller Dual Remote Heated Gear Controller

Warm & Safe Dual Zone Remote Heat Troller
(also sold under the First Gear brand)

Heat-Trollers are true pulse-width modulating controllers, famous for their high quality and reliability.
This is not an old-fashioned rheostat. Heat-Trollers cycle current on and off in seconds, depending on the setting you choose. They do not heat up and actually reduce amperage draw, on your electrical system, when turned dow

This new remote controlled  Heat-Troller gives you much more flexibility without sometimes annoying wires.
The receiver stays inside your jacket, vest or pants and connects to the included fused battery harness. You can keep the remote control within reach anywhere on your bike.

RDHCOAX is a Dual Coax controller,
 - 'Dual' means you can control your heated gear with 2 separated heat zones. For instance, you can control your gloves separate from the jacket. Basically any 2 heated garments but NOT heated garments for 2 different people. Beside from probably drawing too much, controlling the temperature on an other person's heated garment, without that person being able to reach the control, is not a good idea.
 - 'Coax' means it is set up to work with the round coax plug standard found in pretty much all brands of heated clothing. Yes, you can use this controller with your heated gear, any brand heated gear, as long as it uses a coax connector. (most brands do)

SAE, the flat 2 prong plug found on some battery chargers and older heated gear, is an other widely used connector. We have an adapter available to use this Coax controller with SAE gear.

Technical Specifications:
Size Receiver 2.5" x 1.75" x .5"
Size Control  2.35" x 1.3" x .75"
Comes with battery harness with covered fuse holder.
Use this controller with heated liner, pants and gloves, with coax connector, up to a maximum draw of 15 amps.