SKU: EHHT930CR21 Heat-Troller Dual Replacement Transmitter

Replacement dual wireless transmitter for dual wireless controller.

You will need to sync this replacement transmitter with your receiver.

How to sync:

1. Make sure the receiver is unplugged from power.
2. Using one knob on the transmitter, turn the remote on and off quickly 3 times, 6 clicks total, allowing the LED to light between each click. You should end with the switch in the OFF position.
3. The LED on the transmitter will start double blinking. This mode will only last 10 seconds.
4. While the transmitter is double blinking, plug your receiver into the power. You only have 10 seconds to do this. Plugged in, the units will now automatically start pairing. When they are in sync, with the receiver still powered, turn on the transmitter. The LED on the transmitter will blink 3 times.

Once synced, you should never have to do this again.