SKU: AMRM9310 RAM Mounts Handlebar Perch/Controls Base

RAM Mounts Handlebar Perch/Controls Base
# RAM-B-309-1U

Base with 1" B size ball connects to your handlebar clutch/brake clamp, left or right side. Fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware provided in the kit.

This RAM mounting base will fit Goldwing, Harley Davidson and most other motorcycles. The hole centers have a minimum width of 0.94" (24mm) and a maximum of 1.58" (40mm). If you are not sure if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.

• Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
• Backed by a lifetime warranty

Hardware Included:

• (2) M6 x 55mm Hex Bolts
• (2) #1/4-20 x 2" Hex Bolts
• (2) 1/4"-20 x 2.5" Hex Bolts
• (2) 1/2" Spacers
• (2) 1/4" Split Lock Washers